High compression turbo feasibility in a Bav
Posted: Sep 17, 2020 5:29 PM
I am in the planning stages of a engine swap into a 72 Bavaria and am considering a simple relatively low power turbo option. I already have a fully rebuilt B35 with PB 10.5:1 pistons, N21 cam, and megasquirt in an E30 that I could use. I also have a B34 of unknown history and mileage that has a broken rocker at my disposal.
Is it feasible to turbo the B35 using low boost (8-10) on 93 octane using a TCD bottom mount manifold ( with or without intercooler)? If intercooled I think it would need to be W2A due to not wanting to hack up the E3 sheet metal and I plan on functional A/C. I could also go with a different cam in the B35 if it would work.
If I end up needing to use the B34 block I am also considering getting some regular B35 pistons and cam and using my B35 head because the head is already in excellent condition. I am aware that I will need to use the B34 oil pan no matter what block is used to fit the Bav subframe.
The car will also be getting an E28 rear subframe and
I have a 3.46 diff to use. I converted the fuel tank for fuel injection so it now has a in tank 190 lph pump. Is that pump sufficient for my plans?
I also recently picked up a semi-full 15 lb nitrous bottle and line that I picked up for $25 in case I lose my mind.
I would appreciate any feedback on these options.
Thanks
Is it feasible to turbo the B35 using low boost (8-10) on 93 octane using a TCD bottom mount manifold ( with or without intercooler)? If intercooled I think it would need to be W2A due to not wanting to hack up the E3 sheet metal and I plan on functional A/C. I could also go with a different cam in the B35 if it would work.
If I end up needing to use the B34 block I am also considering getting some regular B35 pistons and cam and using my B35 head because the head is already in excellent condition. I am aware that I will need to use the B34 oil pan no matter what block is used to fit the Bav subframe.
The car will also be getting an E28 rear subframe and
I have a 3.46 diff to use. I converted the fuel tank for fuel injection so it now has a in tank 190 lph pump. Is that pump sufficient for my plans?
I also recently picked up a semi-full 15 lb nitrous bottle and line that I picked up for $25 in case I lose my mind.
I would appreciate any feedback on these options.
Thanks